• The NewLink NLKVMHDMI-22CAB 2-port USB & HDMI KVM switch allows the user to switch between two computers of similar connections and supports 4K@60HZ and 4:4:4 chroma subsampling. The switch comes complete with 2 x 1.8m KVM cables  and free UK Delivery.
  • Aten CS18208 8-port USB 3.0 4K HDMI KVM switch features:
    • Superior video quality – up to 4K DCI (4096 x 2160 @ 60Hz) and built-in 2-port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates
    • Cascadable to three levels – controls up to 512 computers
    • Multi-Display feature – stacks up to eight CS18208 units and display video from up to 8 monitors (dual display / triple display / quad display / multi-display)
    • Video DynaSync™ – an exclusive ATEN technology that eliminates boot-up display problems and optimizes the resolution when switching among different sources
    For a standard USB 2.0 and HDMI 8-port KVM Switch, please see CS1798. Data Sheet Manual
  • The Aten CS1922M with MST (Multi-Stream Transport) technology with a built-in hub will enable users to adopt two console displays from a single DisplayPort 1.2 video source to provide an extended desktop mode and splitter mode at resolution up to 4K for multitasking across two displays while reducing bulky cable connections. The switch provides 2-port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer speed and supports HD audio through DisplayPort. NEW Data Sheet Manual
  • Out of stock
    The HDMI-EX200 allows you to extend an HDMI and two-way IR signals over a single 75ohms coaxial cable up to 300m. The HDMO-EX200 carries a full HD 1080p signal plus PCM 48kHz audio up to 7.1ch up to a distance of 100m. The receiver can be daisy-chained to cover unlimited distances. HDMI-EX200 User Manual V1.0 (1)
  • AdderLink XD150FX-MM USB 2.0 & DVI over a single fibre cable up to 400m KVM extender provides perfect digital video with no visible loss or latency allowing you to be certain of quality and control. It offers resolutions up to 2560 x 1600 @60Hz and USB 2.0 Hi-speed for mass storage devices, keyboard, mouse tablet and touch screen. The XD150FX-MM is plug & play and can be controlled and monitored via a web interface. Temperature and status are viewable and each function can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information. Product Sheet Manual  
  • S Y Electronics  SY-UHD-FM-SET  Fibre HDMI UHD 4K with 4 x HID, RS232 extender  supports a distance of up to 1.4 km using two single-mode fibre cables. It supports all HDMI resolutions up to 3840x2160 @ 30Hz, USB keyboards & mice, USB touch screens and bi-directional RS232. Data Sheet
  • AdderLink XD522-DP-PAIR AdderLink USB 2.0 DisplayPort RS232 & Audio 100m CATx Extender. The system supports DisplayPort 1.1 video resolutions to a maximum of 3840x2160@30Hz, 2560 x1600@60Hz  or two 1920 x1200@60Hz screens. The receiver unit supports DisplayPort Dual Mode (DP++) also. DPCP and HDCP are not supported. It supports up to six USB 2.0 devices (low or full speed). The system does not allow non-HID devices on ports marked “A”. Isochronous devices are supported (i.e. USB audio or video devices) on the Hi-Speed link only marked “B”. The XD522-DP supports Digital stereo audio as well as RS232. Data Sheet Manual
  • PDUeX-SW-16A-08H PDUeXpert 8-way Horizontal Switched Remote IP PDU allows power on/off and per outlet monitoring and control. It features Circuit Breaker protection and user-defined alarm thresholds. It is available in 16 & 32 Amp.
  • Aten UCE260 USB 2.0 over CATx extender can easily send the USB signals via Cat.5/5e/6 cable up to 60 meters (196 ft) at data rate of High Speed (480Mb/s) , Full Speed (12Mb/s) and Low Speed (1.5Mb/s).  It allows you to locate your USB device or hub up to 60m (198 ft) away from your computer. The extender does not require any additional software installation. Data Sheet
  • Adder ALPV150T (transmitter only) offers a resolution up to 1080p HD video resolution including 1080i & 720p at a distance up to 150m away. Simply plug the transmitters VGA port into your computer and plug in the USB port, then plug the receiver unit into your screen. Finally, connect the two units together with a length of CATx cable, and you’re finished. Now start delivering your message to customers, clients, staff or who ever you wish. The ADDERLink LPV fully supports DDC and the remote module (ALPV150R) has a video adjustment skew to control picture sharpness on the display screen. Data Sheet Manual
  • Adder DDX-USR DVI, USB and audio digital over CATx User Station /KVM extender supports resolution up to 1920 x 1200 at 60Hz including 1080p. It can be used as a KVM extender when used with DDX-CAM-DP & DDX-CAM-DVI. However, when you introduce a DDX switch between them, suddenly you have the basis of an expandable switching matrix. Just add further DDX-CAM and DDX-USR modules for each new computer system and user. It uses a single CATx cable up to 50m. Data Sheet Manual    
  • Adder
    RC4-8P8C remote control unit can be used to provide direct push button access to any channel from your desktop.

Title

Go to Top