-
Aten VS0116 16-port VGA splitter with audio allows a single VGA video signal to be distributed to 16 output displays with audio. The splitter support up to 250MHz video bandwidth and up to 65m distance transmission, which provides optimum video quality, supported by resolutions up to 1920x1440. The splitter supports VGA, SVGA, UXGA, WUXGA nd DDC, DDC2, DDC2B Compatible (Port 1 only). Data Sheet Manual
-
Adder ALDV120P DVI over CATx up to 50m extender (pair) uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual
-
AdderLink X200/R USB and VGA Remote User Station features resolutions 1920 x 1200 at distances up to 50 m/165 ft, 1600 x 1200 at distances up to 200 m/650 ft, 1280 x 1024 at distances up to 300 m/1000 ft. using CATx cable (x=5,5e,6). Data Sheet Manual
-
Adder X100A/R PS2, VGA & Audio CATx Remote user station up to 100m/330ft using CATx cable (x=5,5e,6,7) supports any computer with PS/2 or USB style keyboard and mice, flat-screen and CRT style monitors with standard HD-15 video connectors and optional audio through 3.5mm audio jack. Data Sheet Manual
-
The VHX-EN7330 encoder allows the connected HDMI video to be compressed into 2 independent IP streams. The primary JPEG 2000 stream provides a very high quality video and audio transmission with less than a frame duration latency whilst the secondary H.265 stream can be used for monitoring via standard software or third party applications. The VHX-EN7330 can accept HDMI signals up to 4K resolutions and up to 60Hz frame rate. Video streaming is compatible with a standard 1G Ethernet IGMP switcher using the Unicast and Multicast protocols. Point to point, point to multipoint and matrix switching can be achieved easily using industry standard Ethernet switchers and installation enhanced with the POE feature. A USB host connection allows a connected computer to extend both USB V1.1 and V2.0 signal to a VHX-DC7330 decoder which can provide the facility for up to 5 peripherals to be added. Other control signals can also be transmitted over the same network which can be used for RS232, infrared and CEC signals. The VHX-EN6330 together with the decoder VHX-DC6330 provide a highly scalable and cost-effective solution for distributing HD video and control signals for a multitude of applications. Video walls can also be created with multiple decoders up to a 9×9 system.
-
The VHX-7000-H controller allows the user to control and mange H.264 & H.265 IP streams within an Ethernet network environment; this is achieved through a convenient internal Web GUI. The unit also provides the necessary network isolation between the Multicast video system and any existing network infrastructure.
-
Aten VE801 HDMI HDBaseT Lite up to 70m 4K extender over a single CAT5/6 cable supports HDMI features that include 3D, Deep Color and 4K image resolutions, plus Dolby Digital 5.1, DTS HD audio and it is HDCP compatible. It features HDBaseT Anti-jamming that resists signal interference during high-quality video transmission using HDBaseT technology and configures optimum EDID settings for smooth power-up, high-quality display and use of the best resolution across different screens. Data Sheet
-
Aten NEW CS1822 2-port USB 3.0 4K HDMI KVMP switch allows you to use one USB keyboard/mouse and one HDMI monitor control four computers and share two USB peripherals. It offers superior video quality – 4K UHD (3840 x 2160 @ 60Hz) and 4K DCI (4096 x 2160 @ 60Hz), Video DynaSync™ – an exclusive ATEN technology that eliminates boot-up display problems and optimizes the resolution when switching among different sources with built-in 2-Port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates. as well as Audio Mixer Modes that mixes up to two audio sources as audio output. The CS1822 comes with ATEN default EDID mode for smooth power-up and high-quality display and resolution optimization to eliminate compatibility issue. The switch offers independent switching of KVM, USB peripheral, and stereo audio focus2 and is HDMI 2.0 compliant and HDCP 2.2 compliant and it also supports HD Audio2. Data Sheet Manual
-
Aten VS1204T VGA 4-way and audio over CAT 5 up to 300m splitter supports local display and up to 225 MHz bandwidth. It is audio enabled (nono) and produces \ superior video quality up to 1920 x 1200 @ 60Hz. The Splitter can be a complete solution ideal for any professional A/V installation that requires multimedia content to be delivered to multiple destinations located up to 300 m away from the source. Data Sheet