PC Connector: HDB,PS/2 and Audio
Console Connector:3 in 1 SPHD(Keyboard/Mouse/Video)
Length:1.2m (Slim)
-
3m PS2, VGA, and Audio KVM Cable -
5m PS2, VGA, and Audio KVM Cable
-
Aten Cs72U audio enabled 2 port USB & VGA KVM switch with full base responce that provides a rich experience for 2.1 channel sorround systems. It is supplied with all the necessary KVM cables to connect two computers. Data Sheet Manual Please call for availability -
Aten CS74U is a non-powered 4-port USB & VGA KVM switch with audio, supports video resolution of up to 2048 x 1536 and DDC2B. It is supplied with all necessary KVM cables to connect 4 computers. Data Sheet Manual Please call for availability -
The Aten CM0264 is a 2 x 4 DVI-HD Audio / Video KVMP switch with innovative desktop control copy and paste feature. Data Sheet Manual -
The CatX Mini DP Tx converts DisplayPort video to VGA and can transmit that VGA video up to 300m (used with CatXQ AV Rx2). -
The SY-HDBT60 Extender Set features HDBT Technology which is able to delivery uncompressed Hi-definition Video with embedded Audio up to 60m. No longer available. Please see SY-HDBT-70-SLIM-SET -
SY-HDBT-70-PSET is an HDBT Lite twisted pair for HDMI, IR&RS232 at 70m transmission with Power over Cable (PoC) support. Replaced with SY-HDB-70-SLIM-SETT -
The HDBT-eco70-Set is an HDBaseT extender for HDMI and IR transmission up to 70m with one-way PoC from the transmitter end. It includes the transmitter and receiver, supports HDMI1.4, 3D, 4K and is HDCP compliant. No longer available. Please see SY-HDBT-70-SLIM-SET
-
Out of stock
S Y Electronics CX-0M-AVP-T2 2-way CATx spllitter / transmitter broadcasts a sharp high quality video to two separate displays at distances of up to 300m (600m span), using low cost Cat5 UTP cable. -
CatX AV receivers provide a flexible solution for outputting VGA video + Audio over Cat5/6 UTP cable up to 150m. -
The CatXQ AV Rx2 outputs two high quality videos to any two VGA video displays up to a continuous cable distance of 300m.
-
These CatX Repeaters receive a video signal from any CatX AVP or CatX Mini transmitter via UTP cable and provide a sharp high quality video at up to 150m. -
Out of stock
The CatX AVP Matrix 2×8 transmitter routes two VGA video sources over Cat5e/6 cable, in any combination, to a maximum of eight displays. -
S Y Electronics 4 Way 4 Way Output Fibre Card for SY-MM -
NewLink HD-SWTC404 4-port HDMI 4 HDMI inputs to 1 HDMI output high speed switch with built-in HDCP support and 1080p resolution supports 12bit per channel deep colour(36bit in total). It features Audio return Channel (ARC) and supports compressed & compressed audio as well as digital audio Toslink and COAX output simultaneously and Stereo audio output from source device. -
The Aten CN8000 Single Port KVM Over IP switch has local & remote access, Supports PS/2,USB, Sun Legacy (13W3) 2 and serial (RS-232) connectivity, Virtual Media Support, Provides over-IP capability to KVM switches that do not have built in over-IP functionality, and has high video resolution – up to 1600 x 1200 @ 60Hz- 32 bit color depth for the local console; up to 1600 x 1200 @ 60Hzwith 24 bit color depth for remote sessions. No Longer Available: Replaced by CN8000A Data Sheet Manual -
HD Anywhere MHUB2K88 8x8 HDMI over Cat 5e/6 matrix supports Full HD 1080p up to 50m / 164 ft with two-way IR, ARC (at RX), audio extraction (at hub) and two mirrored HDMI ports. Sold as a complete package inc. IR and display receivers. -
HD Anywhere mHub2K14 HDMI over Cat 5e / 6 splitter with local HDMI out delivers Full HD 1080p up to 50m / 164 ft with two-way IR. The HDMI loop out on the central hub facilitates stacking multiple splitters or the integration of a fifth display. Sold as a complete package inc. IR and display receivers. -
NRGence PE5220SG 0U 20 outlets eco PDU offers real-time power measurement - allowing you to monitor the power status of devices attached to the PDUs, either at the PDU device or Bank level, from practically any location via a TCP/IP connection. It also offers comprehensive power analysis reports – providing precise measurements of current, voltage, power and watt-hour in a real-time display. It features 1 x IRC 60309 C20 input and 20 x IEC 430 C13 outlets. Data Sheet Manual -
The Aten NRGence PE5340SG 0U 40 AC outlets is an intelligent PDUs that contains in IEC configuration and provides secure, centralized, intelligent, power management of data center IT equipment (servers, storage systems, KVM switches, network devices, serial data devices, etc.), as well as the ability to monitor the center's health environment via sensors. It features 1 x IEC 60309 IEC 32A input x 40 x IEC320 C13 outlets. Data Sheet Manual -
The Aten NRGence PE7214 1U eco PDUs are intelligent PDUs that contain 14 AC outlets and are available in various IEC socket configurations, supports 2-level account/password security, IP/MAC filter, 128 bit SSL, RADIUS as well as PDU and outlet level power metering and monitoring. PE7214G also supports current, voltage, power, power dissipation, temperature, and humidity metering, threshold level setting and door sensor. Data Sheet Manual -
Aten PE7328G NRGence 0U 28 Outlets Intelligent eco PDU provide a secure, centralized, intelligent, power management (power on, off, cycle) of data center IT equipment (servers, storage systems, KVM switches, network devices, serial data devices, etc.), as well as the ability to monitor the center's health environment via sensors. The PDU offers remote power control combined with real-time power measurement — allowing you to control and monitor the power status of devices attached to the PDUs, either at the PDU device, bank, or outlet level, depending on the model, from practically any location via a TCP/IP connection. Input connection is 1 x IEC 60309 and outlet types are: 24 x IEC320 C13 + 4 x IEC320 C19 Bank1-1 : Outlet 1 – 14 ; 12 x C13 + 2 x C19 Bank1-2 : Outlet 15 – 22 ; 7 x C13 + 1 x C19 Data Sheet -
Aten NRGence PE9330G eco PDU offer remote power control combined with real-time power measurement The power status of each outlet can be set individually, allowing users to switch each device On/Off. It also offers comprehensive power analysis reports which can separate departments and locations, providing precise measurements of current, voltage, power and watt-hour in a real-time display. Installation and operation of the PE9330 is fast and easy: plugging cables into their appropriate ports and user-friendly browser-based configuration and management is all that is entailed. Since the eco PDU firmware is upgradeable over the Net, you can stay current with the latest functionality improvements simply by downloading updates from the manufacturer's website as they become available. PE9330 input connection is 1 x IEC 60309 32A. The Outlets are: Total : 26 x IEC320 C13 + 4 x IEC320 C19 Bank1-1 : Outlet 1 – 14 ; 12 x C13 + 2 x C19 Bank1-2 : Outlet 15 – 22 ; 7 x C13 + 1 x C19 Bank2 : Outlet 23 – 30 ; 7 x C13 + 1 x C19 Data Sheet Manual -
CE790 USB & VGA is IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet. It features dual console operation where you can control your system from both the transmitter and receiver USB consoles and high resolution video - up to 1920 x 1080. It can be used point-to-point, point-to-multipoint, and multipoint-to-multipoint. If a multipoint set up is required, extra CE790R and CE790T will be needed. In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. Data Sheet Manual -
CE790T USB & VGA is IP based KVM Extender (Transmitter Only) with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet. It features dual console operation where you can control your system from both the transmitter and receiver USB consoles and high resolution video - up to 1920 x 1080. It can be used point-to-point, point-to-multipoint, and multipoint-to-multipoint. If a multipoint set up is required, extra CE790R and CE790T will be needed. In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. Data Sheet Manual -
CE790R USB & VGA is IP based KVM Extender (Receiver Only) with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet. It features dual console operation where you can control your system from both the transmitter and receiver USB consoles and high resolution video - up to 1920 x 1080. It can be used point-to-point, point-to-multipoint, and multipoint-to-multipoint. If a multipoint set up is required, extra CE790R and CE790T will be needed. In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. Data Sheet Manual ce790_s-2014-10-24.pdf (1021.78 KB) ce790 GUI_-s_2011-01-14.pdf (591.21 KB)
-
Adder ePower PSU-1GUARD enables the remote power control of one device over the Internet, Intranet, or locally through a serial RS232 connection. It features two password levels plus various administrator/user rights and security masks give IP security and the restart delay can be chosen between 5 and 60 seconds between off/on for activity at all power outlets. Data Sheet Manual -
Adder PSU-8SLAVE ePower distribution unit can be used only with the Adder KVM Over IP products and it is not compatible with any other manufacturer. It features two separate power inputs to improve security and increase total current load. Built-in serial interface allows easy control using simple ASC11 commands (can be used by any server or KVM switch to individually control the 8 power outlets. Data Sheet Manual -
AdderLink ALSTX/ALSRX Silver PS2, VGA and RS232 up to 200m over CATx Silver KVM extender with resolution up to 1600 x 1280 at distances up to 100 metres/330 feet, 1024 x 768 at distances up to 200 metres/650 feet. It supports PS/2 style keyboard, PS/2 style mouse, flat-screen and CRT style monitors with standard HD-15 video connectors. Also extends a transparent RS232 connection that may be used for touch-screens or a wide variety of other serial devices. The ALSTX/ALSRX also offers a local console. Manual -
Aten CS1184 USB & DVI 4 port Secure KVM switch is NIAP-certified and passed the Evaluation Assurance Level 2 (EAL2+) requirements for Peripheral Sharing Switch (PSS) for Human Interface Devices (HIDs) Protection Profile v2.1, satisfying the latest security requisites set by the U.S. Department of Defense for peripheral switches. Compliance ensures maximum information security while sharing a single set of HIDs (keyboards, mouse, speakers, etc.) between multiple computers. Conformity with Protection Profile v2.1 certifies that other USB peripherals cannot be connected to the console ports of the CS1182, and that only a keyboard and mouse are accommodated, therefore providing high-level security, protection and safekeeping of data. Data Sheet Manual -
Basic individually fused socket Rack PDUs provide reliable rack power distribution via a single input with multiple individually fused sockets output receptacles and distributes power from low amperage single phase circuits to higher-power 3-phase solutions. -
Basic individually fused socket Rack PDUs provide reliable rack power distribution via a single input with multiple individually fused sockets output receptacles and distributes power from low amperage single phase circuits to higher-power 3-phase solutions.
-
Basic individually fused socket Rack PDUs provide reliable rack power distribution via a single input with multiple individually fused sockets output receptacles and distributes power from low amperage single phase circuits to higher-power 3-phase solutions.
-
Basic individually fused socket Rack PDUs provide reliable rack power distribution via a single input with multiple individually fused sockets output receptacles and distributes power from low amperage single phase circuits to higher-power 3-phase solutions.
