-
The Smart-e 444K-912-WP is a flexible and comprehensive professional HDMI Wall plate extender with CAT 6 distribution system for Commercial, Education and Residential use. It features double gang Wall plate transmitter, HDMI 2.0 4K@60Hz, 4:4:4, 18G, HDR10, Dolby Vision, HDCP/EDID/DDC transparent link, RGBHV resolutions up to UXGA, priority switching HDMI & VGA and output reach up to 70m. Data Sheet
-
The Smart-e 444K-925 is ideal for extending any HDMI signal beyond its standard 5m length to an impressive 150m of Cat cable whilst maintaning all the necessary auxillary communication data like CEC and DDC for correct EDID reading and HDCP. The 444K-925 has extra features to make life easier for the installer: integral looping HDMI inputs at the transmitter and de-embedded audio at the receiver minimise the need for additional products. Data Sheet
-
Smart-e 4K-710 HDBaseT 70m HDMI Extender pair is designed to extend HDMI, DVI or DisplayPort together with bi-directional IR signals and RS232 communication over a single twisted pair CAT 5e-8 cable. The units use HDbaseT Lite technology to extend 12 bit Deep Colour 3D, 4K and 2K resolutions together with 1080p @60Hz. Data Sheet Manual
-
The Smart-e 444K-725 is a HDBaseT transmitter/receiver pair capable of transmitting UHD HDMI signals up to 4K UHD resolutions. The extender pairs provide the pass through of wide band bi-directional InfraRed signals and full duplex RS232 up to 115Kbaud. Whilst POH power (24V) can be sent by either the TX or RX through the Cat 6 cable to provide power to the re-mote end. All that is required is a single Cat6 cable connection to provide all these features. Data Sheet
-
Smart-e 4K-800 HDBaseT 100m HDMI Extender pair for HDMI, DVI, DisplayPort and Infrared. Resolutions 4k,2k, 1080p@60Hz, 3D fully HDCP V2.2. Data Sheet Manual
-
Smart-e 4K-810 100m HDBaseT extender pair for HDMI, Infrared, 100baseT Ethernet and RS232. Resolutions 4k,2k, 1080p@60Hz, 3D fully HDCP compliant. It distributes signals over a single 70m CAT 5-8 cable with wide bandwidth IR transmission and Ethernet and RS232 pass-through. It features dual port Ethernet switch and it is compatible with Smart TV's. Data Sheet Manual
-
Out of stockSmart-e 4K-900 100m HDBaseT extender pair for HDMI, Infrared and RS232 providing inline power to 100m. Resolutions 4k,2k, 1080p@60Hz, 3D fully HDCP compliant. The extender uses a single CAt5-8 cable, offers wide badwidth IR transmission, in-line powered receiver and transparent RS232 passthrough. Data Sheet Manual
-
Out of stockThe NewLink HD-EX345-120-RX (Receiver Only) HDMI over a single CAT5/CAT6 receiver is an add-on to the HD-EX345-120 extender to allow point-to-point using one transmitter and one receiver, or one-to-many by using one transmitter to many receivers. One-to-many will require an unmanaged gigabit networking hub and multiple receivers as shown in the diagram.
-
Out of stockThe NewLink HD-EX345-120A HDMI over CAT5/CAT6 extender is a Plug & Play design and can transmit up to 120m using CAT6 cable. It supports 20-60KHz IR devices, and local loop output and IR passback.
-
Out of stockThe HDMI-120 with two way IR control extends an HDMI signal over a single CAT5/6 cable (CAT6 up to 120m) . It is capable of transmitting HDMI images of up to 1080p resolution over a distance of up to 120m. It HDCP compatible and supports IR passback.
-
The HDMI-EX100 HDBAseT4K RS232 with two way IR control extends an HDMI signal over a single CAT65/6 cable up to 100m. The HMI-EX100 requires only one power supply. Full control of devices at each end is possible using the built in IR and RS232 facilities and this kit can connect your smart TV to the internet using the same network cable. It is capable of transmitting HDMI images of up to 4k UHD resolution over a distance of up to 70m and 1080p images over a distance of up to 100m.