-
Adder ALDV100R HDMI over CATx up to 50m receiver unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. You can mix-n-match The whole AdderLink DV family of extenders share a common advantage of cross connection. The HDMI transmitters (ALDV100T) of the family can seamlessly be connected to the DVI-D receivers (ALDV120R) and vice versa. Data Sheet Manual
-
Adder ALDV120T DVI over CATx up to 50m transmitter unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual
-
Adder ALDV120R DVI over CATx up to 50m receiver unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual
-
The Aten VB802 extends the transmission range an extra 60m over two Cat 5e cables and provides the quickest and most efficient way to move multimedia content from Transmitter to Receiver. It is HDMI and HDCP compatible, supports Dolby True HD and DTS HD Master Audio, superior video quality – HDTV resolutions of 480p, 720p, 1080i and 1080p (1920 x 1080) and has 8-level EQ adjustment to improve image quality. Data Sheet
-
Out of stockThe HDMI-EX358 HDbiT4K extends an HDMI signal over a single CAT65/6 cable up to 120m. The HMI-EX358 can support a resolution up to Ultra HD 4K x 2K @ 30Hz, uses a single CAT5 or CAT6 cable, supports IR signal and standard audio Direct Stream Digital (DSD) and HD (HBR) audio. The HDMI-EX358 is HDMI1.4 and HDCP1.4 compliant.
-
Aten VS184B 4-way True 4K HDMI splitter allows the user to duplicate the same source on four displays and supports max resolutions of up to 4096 x 2160 / 3840 x 2160 @ 60 Hz (4:4:4) with EDID Expert™ – Selects optimum EDID settings for smooth power-up, high-quality display and use of the best video resolution via EDID DIP Switch, allowing users to effortlessly switch among Port 1, Default, and Auto. Data Sheet
-
Aten BE802R HDMI HDBaseT Receiver extends signl up to 70m from source using a single CATx cable and supports RS-232 and IR signaling pass-through. The VE802R is HDMI (3D, Deep Color,4k) and HDCP compatible. The VE802R is perfect for a digital entertainment center or any installation that requires superior video quality. It features Anti-jamming that resists signal interference during high-quality video transmission using HDBaseT technology and POH (Power over HDBaseT) – supplies power from Transmitter to Receiver over a long distance via one Cat 5e/6/6a cable. Data Sheet Manual
-
Aten VS0801H 8-port HDMI switch offers an easy and affordable way to add HDMI capabilities to your home theater system by allowing you to switch easily between up to eight HDMI A/V sources (such as an HD camcorder or satellite box, HD-DVD player, hi-def Blu-ray player, home theater PC, stand-alone streaming media player, gaming console, etc.) that are connected to your HDMI display. The switch supports Dolby True HD and DTS HD Master Audio, long distance transmission up to 20m (24 AWG), up to 60 Hz refresh rate and superior video quality - HDTV resolutions of 480p, 720p, 1080i, 1080p (1920x1080); VGA, SVGA, SXGA, UXGA, and WUXGA (1920x1200). It id DD and HDCP 1.1 compatible. Data Sheet vs0801h-w_2015-05-15.pdf vs0801h-rs232-control-tool-w_2015-11-09.pdf VS0801H-IR Command-s_2013-08-30.pdf
-
S Y Electronics SY-HDBT-70-T (Transmitter Only) HDBaseT HDMI 4K with Bidirectional IR & RS232 can extend a signal up to 70m using a single CATx cable with HDCP support and HDMI 1.4 compatibility (4K data can be extended up to 40m). It is the slimmest HDBaseT extender on the market measuring only 108 x 70 x 11.5 mm. It supports all HDMI resolutions up to 4K x 2K (including 1080p, 1080i, etc..) as well as 3D and CEC. SY’s ingenuous chassis cooling system ensures maximum reliability for demanding environments. Manual -
S Y Electronics SY-HDBT-70-R (Receiver Only) HDBaseT HDMI 4K with Bidirectional IR & RS232 can extend a signal up to 70m using a single CATx cable with HDCP support and HDMI 1.4 compatibility (4K data can be extended up to 40m). It is the slimmest HDBaseT extender on the market measuring only 108 x 70 x 11.5 mm. It supports all HDMI resolutions up to 4K x 2K (including 1080p, 1080i, etc..) as well as 3D and CEC. SY’s ingenuous chassis cooling system ensures maximum reliability for demanding environments. Manual -
The Aten VS482 4-port Dual View HDMI switch offers an easy and affordable way to add HDMI capabilities to your home theater system by allowing you to switch easily between up to four HDMI A/V sources that are connected to up to two HDMI displays. It features Audio Return Channel (ARC) where you can connect an HDMI cable to the ARC port to send audio from your source device to your audio/video receiver, OSD menu for system configuration setting and information display, and EDID Expert technology to set up different configurations via different EDID mode. The VS482 is HDCP compatible and supports Dolby True HD and DTS HD Master Audio. Data Sheet Manual vs482-rs-232-s_2012-11-26.pdf (339.78 KB) VS482-IR Command-s_2013-08-30.pdf (36.38 KB)
-
Aten VS0108HA 8-port HDMI splitter takes one HDMI source and displays it on 8 displays at the same time. It supports all HDMI-enabled equipment, such as DVD players, satellite set-top boxes and all HDMI displays. It supports resolutions of up to Ultra HD 4kx2k and 1080p Full HD and it is HDMI (3D, Deep, Color, 4kx2k); HDCP Compatible. The splitter has a built-in bi-directional RS-232 serial control port for high-end system control and supports Dolby True HD and DTS HD Master Audio. Data Sheet
-
The VHX-7000-H controller allows the user to control and mange H.264 & H.265 IP streams within an Ethernet network environment; this is achieved through a convenient internal Web GUI. The unit also provides the necessary network isolation between the Multicast video system and any existing network infrastructure.
-
The VHX-EN7330 encoder allows the connected HDMI video to be compressed into 2 independent IP streams. The primary JPEG 2000 stream provides a very high quality video and audio transmission with less than a frame duration latency whilst the secondary H.265 stream can be used for monitoring via standard software or third party applications. The VHX-EN7330 can accept HDMI signals up to 4K resolutions and up to 60Hz frame rate. Video streaming is compatible with a standard 1G Ethernet IGMP switcher using the Unicast and Multicast protocols. Point to point, point to multipoint and matrix switching can be achieved easily using industry standard Ethernet switchers and installation enhanced with the POE feature. A USB host connection allows a connected computer to extend both USB V1.1 and V2.0 signal to a VHX-DC7330 decoder which can provide the facility for up to 5 peripherals to be added. Other control signals can also be transmitted over the same network which can be used for RS232, infrared and CEC signals. The VHX-EN6330 together with the decoder VHX-DC6330 provide a highly scalable and cost-effective solution for distributing HD video and control signals for a multitude of applications. Video walls can also be created with multiple decoders up to a 9×9 system.
-
Adder ALDV120P DVI over CATx up to 50m extender (pair) uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual
-
Aten VE809 HDMI Wireless extender extends an HDMI display up to 30 m from the HDMI source (Distance may vary depending on environment; solid objects such as steel, concrete and brick may view shorter distances). It offers superior video quality – 480p, 720p, 1080i and 1080p with a Built-in IR receiver allows control of source devices from the remote side. It allows you to connect and transmit wireless video content from your Bluray DVD player, HD Cable box or other HDMI device wirelessly, Data Sheet Manual: ve809-s_2012-12-20.pdf VE809-IR Command-s_2013-08-30.pdf
-
Aten VS0110HA 10-port HDMI splitter takes one HDMI source of high definition 4K and displays it on 10 displays at the same time. It supports all HDMI-enabled equipment, such as DVD players, satellite set-top boxes and all HDMI displays. It supports resolutions of up to 4K (4096 x 2160 @60Hz, 4:2:0). The splitter has a built-in bi-directional RS-232 serial control port for high-end system control and supports Dolby True HD and DTS HD Master Audio. Data Sheet Manual
-
Aten CS1794 4 port USB and HDMI KVMP switch with Video DynaSync technology and high-definition sound. It is supplied with all necessary KVM cables to connect 4 computers. Data Sheet Manual
-
S Y Electronics SY-HDBT-EC broadcasts a single HDMI signal via cat 5e/ cat6/ cat 6a cable up to 70m @ 1080p or 40m @ 4K with PoC. IR pass-through allows control of any IR device from either the transmitter or the receiver location. User Manual -
The Smart-e 444K-RX875 is a flexible and cost effective receiver solution to extending HDMI, bi-directional IR, full duplex RS232 together and POC (remote power over cable). The unit is compact and comes with the IR accessories. By incorporating the full HDBaseT technology 4K UHD HDMI signals can be transmitted up to 100m away Data Sheet
-
The VHX-EN6330 is a flexible and cost-effective AVoIP encoder for HDMI, audio, and R232 signals. The unit enables high definition HDMI signals up to 1920 x 1200 resolutions to be transmitted over a 100M or 1G Ethernet network with minimal latency and excellent visual quality.
-
The VHX-DC6330 (Receiver Only) is a flexible and cost-effective AVoIP decoder for HDMI, audio, and R232 signals. The unit enables high definition HDMI signals up to 1920 x 1200 resolutions to be received over a 100M or 1G Ethernet network with minimal latency and excellent visual quality.
-
Adder ALDV100P HDMI over CATx up to 50m extender (Pair) uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. You can mix-n-match The whole AdderLink DV family of extenders share a common advantage of cross connection. The HDMI transmitters (ALDV100T) of the family can seamlessly be connected to the DVI-D receivers (ALDV120R) and vice versa. Data Sheet Manual
-
Aten VS0801HB 8-port True 4K HDMI switch supports video resolutions up to True 4K (4096 x 2160 @ 60Hz 4:4:4), data rates up to 18 Gbps, 3D, Deep Color up to 12-bit, and HD lossless audio formats. The VS0801HB features Auto Switching modes for auto port selection and Instant Switching for a smooth video transition between HDMI ports. Multiple convenient control options include front panel pushbuttons, bi-directional RS-232, IR, and auto switch, allowing for easy integration. It is HDMI 2.0 (3D, Deep Colour, 4K) HDCP 2.2 compliant with clear indication of device status and support for IR extension. Data Sheet Manual
-
Aten NEW CS1822 2-port USB 3.0 4K HDMI KVMP switch allows you to use one USB keyboard/mouse and one HDMI monitor control four computers and share two USB peripherals. It offers superior video quality – 4K UHD (3840 x 2160 @ 60Hz) and 4K DCI (4096 x 2160 @ 60Hz), Video DynaSync™ – an exclusive ATEN technology that eliminates boot-up display problems and optimizes the resolution when switching among different sources with built-in 2-Port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates. as well as Audio Mixer Modes that mixes up to two audio sources as audio output. The CS1822 comes with ATEN default EDID mode for smooth power-up and high-quality display and resolution optimization to eliminate compatibility issue. The switch offers independent switching of KVM, USB peripheral, and stereo audio focus2 and is HDMI 2.0 compliant and HDCP 2.2 compliant and it also supports HD Audio2. Data Sheet Manual
-
Smart-e VHX-DC6350 is a flexible and cost-effective Audio and Video over Internet Protocol (AVoIP) encoder for HDMI, audio, infrared, R232, IR and USB 1.1 signals. The units enable high definition HDMI signals up to 1080p or 1920×1200 resolutions to be transmitted over a 1G Ethernet network with minimal latency and excellent visual quality. Data Sheet User Manual V1.0
-
Smart-e VHX-DC6350 is a flexible and cost-effective Audio and Video over Internet Protocol (AVoIP) encoder for HDMI, audio, infrared, R232, IR and USB 1.1 signals. The units enable high definition HDMI signals up to 1080p or 1920×1200 resolutions to be transmitted over a 1G Ethernet network with minimal latency and excellent visual quality. Data Sheet User Manual V1.0