-
The HDMI-EX70 HDMI HDBaseT over CAT5/6 up to 70 extender with 2 way IR control at each end can transmit 4K over 40m or 1080p over 70m. The extender carries a full HD 1080p HDMI signal plus lossless audio including Dolby trueHD, Dolby Digital Plus and DTS-HD master audio.Only one power supply is required which can be placed at either end - the opposite end receives power via the CAT5/6 cable. -
Out of stock
The HDMI-EX358 HDbiT4K extends an HDMI signal over a single CAT65/6 cable up to 120m. The HMI-EX358 can support a resolution up to Ultra HD 4K x 2K @ 30Hz, uses a single CAT5 or CAT6 cable, supports IR signal and standard audio Direct Stream Digital (DSD) and HD (HBR) audio. The HDMI-EX358 is HDMI1.4 and HDCP1.4 compliant. -
The HDMI-EX100 HDBAseT4K RS232 with two way IR control extends an HDMI signal over a single CAT65/6 cable up to 100m. The HMI-EX100 requires only one power supply. Full control of devices at each end is possible using the built in IR and RS232 facilities and this kit can connect your smart TV to the internet using the same network cable. It is capable of transmitting HDMI images of up to 4k UHD resolution over a distance of up to 70m and 1080p images over a distance of up to 100m. -
The NewLink HD-EXPLE HDMI Over Powerline extender with IR can transmit the signal wherever there is a mains plug, eliminating the need to wire in a network cable or HDMI cable and It can extend a 1080p @ 60Hz signal up to 300m. It supports IR pass back and very easy to set up. -
Sale!
The NewLink HD-EX354K HDMI HDBaseT up to 70m over CATx extender implements HDBaseT extension technology using only one Cat 5e / 6 / 6a / 7 cable to connect the transmitter and receiver and supports resolutions of up to Ultra HD 4kx2k and 1080p Full HD and up to 340MHz bandwidth for high performance video. It features Anti-jamming that resists signal interference during high-quality video transmission using HDBaseT technology. -
The NewLink HD-EX345-120A HDMI over CAT5/CAT6 extender is a Plug & Play design and can transmit up to 120m using CAT6 cable. It supports 20-60KHz IR devices, and local loop output and IR passback. -
Out of stock
The NewLink HD-EX345-120-RX (Receiver Only) HDMI over a single CAT5/CAT6 receiver is an add-on to the HD-EX345-120 extender to allow point-to-point using one transmitter and one receiver, or one-to-many by using one transmitter to many receivers. One-to-many will require an unmanaged gigabit networking hub and multiple receivers as shown in the diagram. -
Smart-e DX-TX8-HDBT-8-way Full HDBaseT output blade features 6.7Gbps-165MHz interface bandwidth, EDID, HDCP, IR/RS232 support and a resolution of 1920x1200 @60Hz. It supports a cable length up to 100m, audio digital embedded and powered by the DMM chassis. -
Smart-e DX-RX8-HDBT 8-way Full HDBaseT input blade features 6.7Gbps-165MHz interface bandwidth, EDID, HDCP, IR/RS232 support and a resolution of 1920x1200 @60Hz. It supports a cable length up to 100m, audio digital embedded and powered by the DMM chassis.
-
Aten CE624 USB 2.0 andDual View DVI up to 100m KVM extender supports HDBaseT 2.0 technology to offer a resolution up to 1920 x 1200 @ 100m, 1920 x 1080 @ 150m and integrated USB 2.0 ports — ensuring fast transmission speeds for peripherals. The CE624 features EDID Buffer for smooth power-up and the highest quality display and enhanced bit error detection and correction to resist signal interference during high-quality video transmissions. Data Sheet Manual -
Aten CE620 USB 2.0 and DVI up to 100m KVM extender supports HDBaseT 2.0 technology to offer a resolution up to 1920 x 1200 @ 100m, 1920 x 1080 @ 150m and integrated USB 2.0 ports — ensuring fast transmission speeds for peripherals. The Ce620 features EDID Buffer for smooth power-up and the highest quality display and enhanced bit error detection and correction to resist signal interference during high-quality video transmissions. Data Sheet -
Smart-e 4K-RX966-WPD 100m HDMI HDBaseT Wall Plate receiver that supports RS232, IR, POH, and 100BaseT Ethernet.
