The HDMI-EX200 allows you to extend an HDMI and two-way IR signals over a single 75ohms coaxial cable up to 300m. The HDMO-EX200 carries a full HD 1080p signal plus PCM 48kHz audio up to 7.1ch up to a distance of 100m. The receiver can be daisy-chained to cover unlimited distances.
This HDMI Extender HDMO-EX200 allows you to extend an HDMI signal up to 300m using only a single 75ohm coaxial cable. Use existing coaxial cables to carry both HDMI and two-way IR signals so you can use a remote control at either end of the cable to control equipment at the opposite end. Connect sources such as DVD or Blu-Ray to the transmitter using HDMI cable of up to 5m in length then connect display equipment such as a TV or projector to the receiver using standard HDMI cable of up to 5m in length. A single coaxial cable is then used to connect the transmitter to the receiver.
This HDMI Extender HDMO-EX200 carries a full HD 1080p HDMI signal plus PCM 48kHz audio up to 7.1ch up to a distance of 100m. A switch on the side of the transmitter allows you to select the appropriate EDID ranging from 1080i with 2 channel audio up to 1080p with 7.1 channel audio. The kit is supplied with power supplies, IR leads, a transmitter and a receiver.The devices carry full size HDMI sockets, BNC sockets and 3.5mm jack sockets for the infra-red transmitters and receivers.
Please note that this extender requires a DC path through the coaxial cable, so connectors must be soldered or crimped to make a good connection.
